If you had to run a cast iron intake 440, what to use?

Print Thread

Re: If you had to run a cast iron intake 440, what to use? [Re: bgilbert] #1363439 01/05/13 02:22 PM 01/05/13 02:22 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Quote: I'm sure they'd just make me pull the carb to check with a magnet if questionable. The rules don't say anything about stock cast, just cast. I'm pretty sure the majority of them are running non-oem cast iron. I saw the Indy cast iron heads, but their intakes didn't say whether they were cast or not. I'll start looking for the 71/72 intake. Thanks guys, definitely alot more info/replies than what I expected. You could run a stock intake on the indy heads port match a bit closer to the Max wedge size the step up at the heads does not hurt as much as the other way. Chebys have some huge cast heads for their big blocks so a set of 440-1 C's should be fail play! Last edited by Dodgem; 01/05/13 02:23 PM.

Entire Thread
Subject	Posted By	Posted
If you had to run a cast iron intake 440, what to use?	bgilbert	01/03/13 03:29 AM
Re: If you had to run a cast iron intake 440, what to use?	RUNCHARGER	01/03/13 03:43 AM
Re: If you had to run a cast iron intake 440, what to use?	gregsdart	01/03/13 03:49 AM
Re: If you had to run a cast iron intake 440, what to use?	fourgearsavoy	01/03/13 03:52 AM
Re: If you had to run a cast iron intake 440, what to use?	Handygun	01/03/13 03:52 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/03/13 04:00 AM
Re: If you had to run a cast iron intake 440, what to use?	dannysbee	01/03/13 04:11 AM
Re: If you had to run a cast iron intake 440, what to use?	RUNCHARGER	01/03/13 04:21 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/03/13 04:25 AM
Re: If you had to run a cast iron intake 440, what to use?	mtolley	01/03/13 01:48 PM
Re: If you had to run a cast iron intake 440, what to use?	scatpacktom	01/03/13 02:05 PM
Re: If you had to run a cast iron intake 440, what to use?	scatpacktom	01/03/13 02:08 PM
Re: If you had to run a cast iron intake 440, what to use?	MRMOPAR622	01/03/13 03:58 PM
Re: If you had to run a cast iron intake 440, what to use?	MR_P_BODY	01/03/13 04:09 PM
Re: If you had to run a cast iron intake 440, what to use?	Von	01/03/13 04:21 PM
Re: If you had to run a cast iron intake 440, what to use?	MR_P_BODY	01/03/13 04:30 PM
Re: If you had to run a cast iron intake 440, what to use?	Slingshot383	01/03/13 05:56 PM
Re: If you had to run a cast iron intake 440, what to use?	cudadoug	01/03/13 06:06 PM
Re: If you had to run a cast iron intake 440, what to use?	ademon	01/03/13 06:56 PM
Re: If you had to run a cast iron intake 440, what to use?	MMiller	01/04/13 05:20 AM
Re: If you had to run a cast iron intake 440, what to use?	MMiller	01/03/13 04:26 AM
Re: If you had to run a cast iron intake 440, what to use?	DaytonaTurbo	01/03/13 04:31 AM
Re: If you had to run a cast iron intake 440, what to use?	RUNCHARGER	01/03/13 05:09 AM
Re: If you had to run a cast iron intake 440, what to use?	DaytonaTurbo	01/03/13 08:04 AM
Re: If you had to run a cast iron intake 440, what to use?	quickd100	01/03/13 11:54 AM
Re: If you had to run a cast iron intake 440, what to use?	forphorty	01/03/13 05:38 AM
Re: If you had to run a cast iron intake 440, what to use?	BSB67	01/03/13 01:03 PM
Re: If you had to run a cast iron intake 440, what to use?	Dodgem	01/04/13 03:41 PM
Re: If you had to run a cast iron intake 440, what to use?	scatpacktom	01/05/13 12:03 AM
Re: If you had to run a cast iron intake 440, what to use?	MMiller	01/05/13 12:47 AM
Re: If you had to run a cast iron intake 440, what to use?	sixpackbee	01/05/13 01:04 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/05/13 01:59 AM
Re: If you had to run a cast iron intake 440, what to use?	BSB67	01/05/13 02:24 AM
Re: If you had to run a cast iron intake 440, what to use?	71yelladustr	01/05/13 03:28 AM
Re: If you had to run a cast iron intake 440, what to use?	gch	01/05/13 04:01 AM
Re: If you had to run a cast iron intake 440, what to use?	@#$%&*!	01/05/13 05:33 PM
Re: If you had to run a cast iron intake 440, what to use?	Dodgem	01/05/13 06:22 PM
Re: If you had to run a cast iron intake 440, what to use?	Skeptic	01/06/13 12:07 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/06/13 01:13 AM
Re: If you had to run a cast iron intake 440, what to use?	Cab_Burge	01/06/13 06:54 AM
Re: If you had to run a cast iron intake 440, what to use?	nz383man	01/06/13 10:44 AM
Re: If you had to run a cast iron intake 440, what to use?	WO23Coronet	01/06/13 03:52 PM
Re: If you had to run a cast iron intake 440, what to use?	cudaman1969	01/06/13 06:10 PM
Re: If you had to run a cast iron intake 440, what to use?	WO23Coronet	01/06/13 06:14 PM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/06/13 06:21 PM
Re: If you had to run a cast iron intake 440, what to use?	Cab_Burge	01/06/13 08:24 PM
Re: If you had to run a cast iron intake 440, what to use?	Dart1031	01/05/13 03:12 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To