If you had to run a cast iron intake 440, what to use?

Print Thread

Re: If you had to run a cast iron intake 440, what to use? [Re: cudadoug] #1363427 01/03/13 02:56 PM 01/03/13 02:56 PM
Joined: Sep 2004 Posts: 6,906 IL, Aurora A ademon master
ademon master A Joined: Sep 2004 Posts: 6,906 IL, Aurora	this is a stock 71 340 with a ton of work. used a mill for the plenum area, assortment of bits for the runners, sandpaper rolls/strips for the inside radius areas. probably 25 hours of work for a couple HP. 7531435-71Demon340(92).jpg (565 downloads)

Entire Thread
Subject	Posted By	Posted
If you had to run a cast iron intake 440, what to use?	bgilbert	01/03/13 03:29 AM
Re: If you had to run a cast iron intake 440, what to use?	RUNCHARGER	01/03/13 03:43 AM
Re: If you had to run a cast iron intake 440, what to use?	gregsdart	01/03/13 03:49 AM
Re: If you had to run a cast iron intake 440, what to use?	fourgearsavoy	01/03/13 03:52 AM
Re: If you had to run a cast iron intake 440, what to use?	Handygun	01/03/13 03:52 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/03/13 04:00 AM
Re: If you had to run a cast iron intake 440, what to use?	dannysbee	01/03/13 04:11 AM
Re: If you had to run a cast iron intake 440, what to use?	RUNCHARGER	01/03/13 04:21 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/03/13 04:25 AM
Re: If you had to run a cast iron intake 440, what to use?	mtolley	01/03/13 01:48 PM
Re: If you had to run a cast iron intake 440, what to use?	scatpacktom	01/03/13 02:05 PM
Re: If you had to run a cast iron intake 440, what to use?	scatpacktom	01/03/13 02:08 PM
Re: If you had to run a cast iron intake 440, what to use?	MRMOPAR622	01/03/13 03:58 PM
Re: If you had to run a cast iron intake 440, what to use?	MR_P_BODY	01/03/13 04:09 PM
Re: If you had to run a cast iron intake 440, what to use?	Von	01/03/13 04:21 PM
Re: If you had to run a cast iron intake 440, what to use?	MR_P_BODY	01/03/13 04:30 PM
Re: If you had to run a cast iron intake 440, what to use?	Slingshot383	01/03/13 05:56 PM
Re: If you had to run a cast iron intake 440, what to use?	cudadoug	01/03/13 06:06 PM
Re: If you had to run a cast iron intake 440, what to use?	ademon	01/03/13 06:56 PM
Re: If you had to run a cast iron intake 440, what to use?	MMiller	01/04/13 05:20 AM
Re: If you had to run a cast iron intake 440, what to use?	MMiller	01/03/13 04:26 AM
Re: If you had to run a cast iron intake 440, what to use?	DaytonaTurbo	01/03/13 04:31 AM
Re: If you had to run a cast iron intake 440, what to use?	RUNCHARGER	01/03/13 05:09 AM
Re: If you had to run a cast iron intake 440, what to use?	DaytonaTurbo	01/03/13 08:04 AM
Re: If you had to run a cast iron intake 440, what to use?	quickd100	01/03/13 11:54 AM
Re: If you had to run a cast iron intake 440, what to use?	forphorty	01/03/13 05:38 AM
Re: If you had to run a cast iron intake 440, what to use?	BSB67	01/03/13 01:03 PM
Re: If you had to run a cast iron intake 440, what to use?	Dodgem	01/04/13 03:41 PM
Re: If you had to run a cast iron intake 440, what to use?	scatpacktom	01/05/13 12:03 AM
Re: If you had to run a cast iron intake 440, what to use?	MMiller	01/05/13 12:47 AM
Re: If you had to run a cast iron intake 440, what to use?	sixpackbee	01/05/13 01:04 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/05/13 01:59 AM
Re: If you had to run a cast iron intake 440, what to use?	BSB67	01/05/13 02:24 AM
Re: If you had to run a cast iron intake 440, what to use?	71yelladustr	01/05/13 03:28 AM
Re: If you had to run a cast iron intake 440, what to use?	gch	01/05/13 04:01 AM
Re: If you had to run a cast iron intake 440, what to use?	@#$%&*!	01/05/13 05:33 PM
Re: If you had to run a cast iron intake 440, what to use?	Dodgem	01/05/13 06:22 PM
Re: If you had to run a cast iron intake 440, what to use?	Skeptic	01/06/13 12:07 AM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/06/13 01:13 AM
Re: If you had to run a cast iron intake 440, what to use?	Cab_Burge	01/06/13 06:54 AM
Re: If you had to run a cast iron intake 440, what to use?	nz383man	01/06/13 10:44 AM
Re: If you had to run a cast iron intake 440, what to use?	WO23Coronet	01/06/13 03:52 PM
Re: If you had to run a cast iron intake 440, what to use?	cudaman1969	01/06/13 06:10 PM
Re: If you had to run a cast iron intake 440, what to use?	WO23Coronet	01/06/13 06:14 PM
Re: If you had to run a cast iron intake 440, what to use?	bgilbert	01/06/13 06:21 PM
Re: If you had to run a cast iron intake 440, what to use?	Cab_Burge	01/06/13 08:24 PM
Re: If you had to run a cast iron intake 440, what to use?	Dart1031	01/05/13 03:12 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To