Hemi Head CNC porting - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hemi Head CNC porting

Print Thread

Re: Hemi Head CNC porting [Re: 572charger] #1355052 12/25/12 10:55 AM 12/25/12 10:55 AM
Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60... V VanishPt master
VanishPt master V Joined: Jan 2003 Posts: 2,521 Richmond Va, KeislerTKO 60...	.08 viton o ring material. I had these done about 2 years ago and they have not leaked. I just put a little smear of grease on the side of the intake so that it would slide down between the heads.

Entire Thread
Subject	Posted By	Posted
Hemi Head CNC porting	Keith Black®	12/18/12 09:14 PM
Re: Hemi Head CNC porting	moparlifer	12/18/12 09:17 PM
Re: Hemi Head CNC porting	Anonymous	12/18/12 10:20 PM
Re: Hemi Head CNC porting	mopartuner	12/18/12 11:52 PM
Re: Hemi Head CNC porting	hemi-itis	12/19/12 04:21 AM
Re: Hemi Head CNC porting	Anonymous	12/19/12 06:15 AM
Re: Hemi Head CNC porting	Keith Black®	12/19/12 12:07 PM
Re: Hemi Head CNC porting	VanishPt	12/19/12 01:16 PM
Re: Hemi Head CNC porting	Keith Black®	12/20/12 11:28 PM
Re: Hemi Head CNC porting	Bishop	12/21/12 02:02 AM
Re: Hemi Head CNC porting	572charger	12/23/12 12:51 PM
Re: Hemi Head CNC porting	VanishPt	12/24/12 12:57 PM
Re: Hemi Head CNC porting	Keith Black®	12/25/12 06:51 AM
Re: Hemi Head CNC porting	572charger	12/25/12 01:27 PM
Re: Hemi Head CNC porting	VanishPt	12/25/12 02:55 PM
Re: Hemi Head CNC porting	Just-a-dart	12/25/12 04:38 PM
Re: Hemi Head CNC porting	studio57	12/29/12 08:48 AM
Re: Hemi Head CNC porting	Keith Black®	12/29/12 12:14 PM
Re: Hemi Head CNC porting	572charger	12/29/12 01:31 PM
Re: Hemi Head CNC porting	roadhazard	12/29/12 03:29 PM
Re: Hemi Head CNC porting	Keith Black®	12/29/12 10:20 PM
Re: Hemi Head CNC porting	VanishPt	12/30/12 12:36 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1