Quote:

4.125 K1 crank
Carrillo rods
Diamond pistons, 13.1 compression
709 lift intake, 687 lift exhaust custom grind soild roller, 108 l/c
277/288 @ .050
w2 heads, 289 cfm @ 700 lift
tunnel ram with 2-750 holleys
comes out to 434''



any guesses on the hp and torque



Just built an Indy headed 427 sb a couple of months ago, Indy 230 heads I ported on a bit, Indy intake converted to 4500, 1050, 14:1, cam was 272-278@ .050 and .765-.710 gross lift.
It was 4.125 stroke, 4.060 bore and used TTI 1 7/8 x 3.5" headers...it made 726HP at 7000rpm and 590's TQ. Martin owns it, he's a member here. I think his handle is w2 stroker?

Anyway, this build could have used better heads and headers, larger carb and more camshaft for a more serious effort but having said that....it was a bracket engine that needed to make more than 700HP so that's where it ended up.
Personally the Indy heads need the short turn revised to allow a different S/T shape...until then they will never live up to their potential.

I'd guess your build will be somewhere around 620-640.

Brian Hafliger