As said if you have a rightie and a leftie on each side you're good. I like to put the lefties on the left sides on each side as I sit in the drivers seat. Eyeball the threads & left hand threads have an unmistakeable angled twist to the threads that cannot be mistaken whereas right hand threads appear to be straight. I thread them into the sleeve so I have as much engagment as possible with enough left so the adjuster can be turned a fair amount either way and I have the wheels straight ahead then a hair inward then thread the tie rods into the adjuster as described till the length is exactly what is needed to just slip into the tapered holes on each end