Quote: I dont think so. I will get a chance to try later tonight. I thought it would fit with the quarter off but the wheelhouse is in the way. May need to cut it in half and butt weld it after all.
From experience, don't cut the one piece floor pan. Carefully drill the spot welds on the tail panel and remove it. The trunk floor will slide right in that way. You can re use your original tail panel or replace it with new. I'm still doing a 70 Charger the same way. New quarters, wheel houses, trunk floor and extensions, tail panel and rear valance. I counted the spot welds in the trunk floor once...almost 400 but the AMD panel fit very well.
