MLS Head Gasket - Better for NON-Torque-Plate Hone?

Print Thread

Re: MLS Head Gasket - Better for NON-Torque-Plate Hone? [Re: BradH] #1321889 10/17/12 05:28 PM 10/17/12 05:28 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	Blocks and heads using MLS gaskets are machined/ surfaced with a smoother finish than normal for sealing reasons. If this hasn't been done I would KISS and put it together with the composite gaskets. -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Entire Thread
Subject	Posted By	Posted
MLS Head Gasket - Better for NON-Torque-Plate Hone?	BradH	10/17/12 07:15 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	Dragula	10/17/12 07:26 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	skrews	10/17/12 07:30 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	BradH	10/17/12 07:47 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	MR_P_BODY	10/17/12 07:57 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	dannysbee	10/17/12 07:59 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	BradH	10/17/12 08:40 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	Triple Threat	10/17/12 09:28 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	BradH	10/18/12 02:15 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	Stanton	10/18/12 02:46 PM
Re: MLS Head Gasket - Better for NON-Torque-Plate Hone?	BradH	10/18/12 02:57 PM

Hop To