Success! Thanks for the help and the great photos. I did find it helpful to cut away parts of the exposed gasket in sections to get started. Gasket is not hidden under trim like on e body. I first went in at too shallow an angle and was mistakenly trying to pry the top part of the clip that is inside the trim. Then saw the great picture. Went in at steeper angle (this is where cutting back the edge of the gasket helped as mine was pretty stiff)and then could catch the part of the clip showed in the pic. Some places I thought were still clipped even after I released them, but were just really stuck from the old sealant. Thanks again.