Getting the Jones to do a 426" SB W5 motor

Print Thread

Re: Getting the Jones to do a 426" SB W5 motor [Re: Streetwize] #1291984 08/27/12 11:09 PM 08/27/12 11:09 PM
Joined: Oct 2007 Posts: 485 Raleigh, NC J j.mcconnell mopar
j.mcconnell mopar J Joined: Oct 2007 Posts: 485 Raleigh, NC	Whose 6.3 rods are you looking at? A set would help me piece together a engine on the cheap with the MP 3.454in. crank I got a while back. Someone else around here runs them but all I see are 6.2 or less.

Entire Thread
Subject	Posted By	Posted
Getting the Jones to do a 426" SB W5 motor	Streetwize	08/27/12 01:36 AM
Re: Getting the Jones to do a 426" SB W5 motor	DJVCuda	08/27/12 01:39 AM
Re: Getting the Jones to do a 426" SB W5 motor	J_BODY	08/27/12 02:24 AM
Re: Getting the Jones to do a 426" SB W5 motor	Streetwize	08/27/12 01:28 PM
Re: Getting the Jones to do a 426" SB W5 motor	B3422W5	08/27/12 10:08 PM
Re: Getting the Jones to do a 426" SB W5 motor	Streetwize	08/28/12 03:03 AM
Re: Getting the Jones to do a 426" SB W5 motor	j.mcconnell	08/28/12 03:09 AM
Re: Getting the Jones to do a 426" SB W5 motor	Streetwize	08/28/12 03:56 AM
Re: Getting the Jones to do a 426" SB W5 motor	B3422W5	08/28/12 05:35 AM
Re: Getting the Jones to do a 426" SB W5 motor	neonic	08/27/12 04:04 PM
Re: Getting the Jones to do a 426" SB W5 motor	J_BODY	08/28/12 05:44 AM

Hop To