Hello,
I am new here and really need some help. The truck has a 1971 440 with flat top forged pistons,forged crank,LY rods, lunati 509 lift cam,516 heads ported with 2.14/1.74 valves, edelbrock performer intake and a holley 800 mechanical secondaries carb.


So far I have changed plugs,wires,distributor,cap,rotor, fuel pump,carb, still starts popping at 4500 rpm no matter what I try. I have also disconnected the gas tank and ran the fuel pump from a clean container hoping it was a tank issue to no avail.
The timing is at 10 degrees advance at idle and pulling to about 35 degrees total at 3200 rpm.
Thanks in advance,
Sam