Comp XE295HL with beehives?

Print Thread

Comp XE295HL with beehives? #1277071 07/31/12 01:09 PM 07/31/12 01:09 PM
Joined: Jul 2009 Posts: 494 IL E EchoSixMike OP mopar
EchoSixMike OP mopar E Joined: Jul 2009 Posts: 494 IL	Looking at using the Comp XE295HL in a '499 lowdeck with Victor heads w/ 1.6:1 rockers. Just looking at the #'s, it seems I can pull more mass out of the valvetrain by using beehive springs than by using Comps toolsteel retainers with conventional springs. The PAC 1518 seems to be suitable with this cam, if a bit light on open pressure, compared to the recommended Comp 924-16 spring. Anyone done this before? S/F....Ken M

Hop To