I recently had to replace the solenoids on my 01 Ram with the 46re and while I was in there, I installed a Trans Go shift kit. I've installed several of these including one in my old 99 Ram and it helped with several things. On this one the shifting is so smooth that you can barely feel it (it feels smoother than before the shift kit install). I know that the computer fights the shift kits on these for smoother shifts but I think that something is amiss based on past experience. Is there anything else that may need to happen when you replace all the solenoids to reset everything? I've already cleared the old codes from the OBD II. The kickdown works properly. Any help is appreciated. Thanks.