Quote:

What heads are you running? Mabe the second ring was installed upside down? Just a guess. My eddy heads were ported into the rocker hold down bolt holes and it pulled oil in the cylinder past the hold down bolts.I replaced the bolts with studs and lock tite them into place and no more smoke but I had oil getting into the intake manifold. Hope you find the problem!



W-5 heads..... I'm calling it wasted out rings...
there is almost no cross hatch left in the bores...
they look shiney... the bit of oil thats on the pistons
and exhaust valve(some on the intakes but not near
as much) is sticky and can be wiped right off with
a paper towel