Quote:

I like replacing the 402 pan with the 1970/71 Street Hemi 440 6 pak 6 quart oil pan and pick up. I use the stock 3/8 pick up on my 518 C.I. pump gas stroker in my Duster, I shift it at 7000 + RPM on every run, car runs low tens at 132+ MPH, no oiling problems so far, going on five years with that set up on several other motors also



I got the truck (rear sump) pan kit just today. It is replacing the 402 that is on the motor. Hemi pan does not clear the rack on alterktion. Found some other posts searching and saw that recommendation is zero to 1/8" clearance for the pickup to pan. Also got a windage tray since it was just a little more than getting the gasket separately.

OP I didn't mean to ask/high-jack earlier.

383, Hemi 4-Speed, AlterKtion, D60