Main/Rod Bearing Clearances

Print Thread

Re: Main/Rod Bearing Clearances [Re: Thumperdart] #1233304 05/15/12 01:16 AM 05/15/12 01:16 AM
Joined: Mar 2003 Posts: 1,632 Lubbock,TX D DavidDean top fuel
DavidDean top fuel D Joined: Mar 2003 Posts: 1,632 Lubbock,TX	Ive run about .002 but everything needs to be straight. I'd like to see .001 per inch of diameter. I've also heard of some big motors that run over .004 .

Entire Thread
Subject	Posted By	Posted
Main/Rod Bearing Clearances	408strokerdart	05/14/12 09:27 PM
Re: Main/Rod Bearing Clearances	Cab_Burge	05/14/12 10:12 PM
Re: Main/Rod Bearing Clearances	408strokerdart	05/15/12 04:28 AM
Re: Main/Rod Bearing Clearances	Thumperdart	05/14/12 10:30 PM
Re: Main/Rod Bearing Clearances	408strokerdart	05/15/12 04:20 AM
Re: Main/Rod Bearing Clearances	MR_P_BODY	05/14/12 10:43 PM
Re: Main/Rod Bearing Clearances	408strokerdart	05/15/12 04:24 AM
Re: Main/Rod Bearing Clearances	MR_P_BODY	05/15/12 04:30 AM
Re: Main/Rod Bearing Clearances	Thumperdart	05/15/12 04:52 AM
Re: Main/Rod Bearing Clearances	curleysracecars	05/15/12 05:12 AM
Re: Main/Rod Bearing Clearances	dodgeboy11	05/15/12 06:59 AM
Re: Main/Rod Bearing Clearances	DavidDean	05/15/12 05:16 AM
Re: Main/Rod Bearing Clearances	MR_P_BODY	05/15/12 05:23 AM
Re: Main/Rod Bearing Clearances	Al_Alguire	05/15/12 06:48 AM
Re: Main/Rod Bearing Clearances	Crizila	05/15/12 02:54 PM
Re: Main/Rod Bearing Clearances	sixpackbee	05/15/12 03:08 PM
Re: Main/Rod Bearing Clearances	Crizila	05/15/12 04:27 PM
Re: Main/Rod Bearing Clearances	BradH	05/15/12 04:16 PM

Hop To