Main/Rod Bearing Clearances

Print Thread

Re: Main/Rod Bearing Clearances [Re: 408strokerdart] #1233296 05/14/12 06:30 PM 05/14/12 06:30 PM
Joined: Jul 2004 Posts: 19,318 State of confusion T Thumperdart I Live Here
Thumperdart I Live Here T Joined: Jul 2004 Posts: 19,318 State of confusion	Jason Pettis and I recentlly had this very same conversation and he said he actually saw less wear and could actually re-use the bearings in 6-second big motors by going as loose as .005........... 72 Dart 470 n/a BB stroker street car `THUMPER`...Check me out on FB Dominic Thumper for videos and lots of carb pics......760-900-3895.....

Entire Thread
Subject	Posted By	Posted
Main/Rod Bearing Clearances	408strokerdart	05/14/12 09:27 PM
Re: Main/Rod Bearing Clearances	Cab_Burge	05/14/12 10:12 PM
Re: Main/Rod Bearing Clearances	408strokerdart	05/15/12 04:28 AM
Re: Main/Rod Bearing Clearances	Thumperdart	05/14/12 10:30 PM
Re: Main/Rod Bearing Clearances	408strokerdart	05/15/12 04:20 AM
Re: Main/Rod Bearing Clearances	MR_P_BODY	05/14/12 10:43 PM
Re: Main/Rod Bearing Clearances	408strokerdart	05/15/12 04:24 AM
Re: Main/Rod Bearing Clearances	MR_P_BODY	05/15/12 04:30 AM
Re: Main/Rod Bearing Clearances	Thumperdart	05/15/12 04:52 AM
Re: Main/Rod Bearing Clearances	curleysracecars	05/15/12 05:12 AM
Re: Main/Rod Bearing Clearances	dodgeboy11	05/15/12 06:59 AM
Re: Main/Rod Bearing Clearances	DavidDean	05/15/12 05:16 AM
Re: Main/Rod Bearing Clearances	MR_P_BODY	05/15/12 05:23 AM
Re: Main/Rod Bearing Clearances	Al_Alguire	05/15/12 06:48 AM
Re: Main/Rod Bearing Clearances	Crizila	05/15/12 02:54 PM
Re: Main/Rod Bearing Clearances	sixpackbee	05/15/12 03:08 PM
Re: Main/Rod Bearing Clearances	Crizila	05/15/12 04:27 PM
Re: Main/Rod Bearing Clearances	BradH	05/15/12 04:16 PM

Hop To