Adusting mech advance on MP Dist

Print Thread

Re: Adusting mech advance on MP Dist [Re: 1toolguy] #120671 09/14/08 07:52 PM 09/14/08 07:52 PM
Joined: Nov 2004 Posts: 1,708 S. Il. U.S.A. 5spdcuda top fuel
5spdcuda top fuel Joined: Nov 2004 Posts: 1,708 S. Il. U.S.A.	The plastic would make it a lot faster, but you can still get there. I did mine by trial and error. Closing the slots about half way will get you 16-18 degrees initial with 32-34 degrees total.

Entire Thread
Subject	Posted By	Posted
Adusting mech advance on MP Dist	1toolguy	09/14/08 08:14 PM
Re: Adusting mech advance on MP Dist	JimG	09/14/08 08:41 PM
Re: Adusting mech advance on MP Dist	1toolguy	09/14/08 08:45 PM
Re: Adusting mech advance on MP Dist	JimG	09/14/08 08:51 PM
Re: Adusting mech advance on MP Dist	1toolguy	09/14/08 08:57 PM
Re: Adusting mech advance on MP Dist	1_WILD_RT	09/14/08 09:04 PM
Re: Adusting mech advance on MP Dist	500Stroker	09/14/08 09:40 PM
Re: Adusting mech advance on MP Dist	AndyF	09/14/08 11:25 PM
Re: Adusting mech advance on MP Dist	ZIPPY	09/15/08 03:28 AM
Re: Adusting mech advance on MP Dist	dgc333	09/24/08 12:47 PM
Re: Adusting mech advance on MP Dist	1toolguy	09/24/08 12:41 AM
Re: Adusting mech advance on MP Dist	5spdcuda	09/14/08 11:52 PM
Re: Adusting mech advance on MP Dist	1toolguy	09/15/08 01:26 AM
Re: Adusting mech advance on MP Dist	Pacnorthcuda	09/15/08 01:50 AM
Re: Adusting mech advance on MP Dist	dgc333	09/24/08 12:53 PM
Re: Adusting mech advance on MP Dist	CJK440	09/24/08 02:39 PM
Re: Adusting mech advance on MP Dist	dgc333	09/24/08 11:16 PM
Re: Adusting mech advance on MP Dist	mrpatel	09/26/08 01:56 AM

Hop To