360 rods in 318 block - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 360 rods in 318 block

Print Thread

Re: 360 rods in 318 block [Re: dogdays] #1181908 02/20/12 02:51 AM 02/20/12 02:51 AM
Joined: Jan 2003 Posts: 9,826 las vegas 70AARcuda master
70AARcuda master Joined: Jan 2003 Posts: 9,826 las vegas	just make sure the "318 pistons" skirts clear the counterbalances on the cut down 360 crank... scat make a 3.58 stroke crank with 318 bearing size... Tony 70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)

Entire Thread
Subject	Posted By	Posted
360 rods in 318 block	gogo318	02/19/12 07:58 AM
Re: 360 rods in 318 block	340SHORTY	02/19/12 09:04 AM
Re: 360 rods in 318 block	BulletBob	02/19/12 10:15 AM
Re: 360 rods in 318 block	gogo318	02/20/12 02:54 AM
Re: 360 rods in 318 block	scratchnfotraction	02/20/12 03:20 AM
Re: 360 rods in 318 block	dogdays	02/20/12 05:44 AM
Re: 360 rods in 318 block	70AARcuda	02/20/12 06:51 AM
Re: 360 rods in 318 block	dogdays	02/20/12 05:22 PM
Re: 360 rods in 318 block	70Cuda383	02/19/12 02:15 PM
Re: 360 rods in 318 block	TheBlueBeast	02/19/12 02:52 PM
Re: 360 rods in 318 block	scratchnfotraction	02/19/12 03:41 PM
Re: 360 rods in 318 block	Supercuda	02/19/12 03:42 PM
Re: 360 rods in 318 block	TheBlueBeast	02/19/12 03:49 PM
Re: 360 rods in 318 block	scratchnfotraction	02/19/12 04:14 PM
Re: 360 rods in 318 block	vdriver	02/19/12 04:38 PM
Re: 360 rods in 318 block	TheBlueBeast	02/19/12 04:47 PM
Re: 360 rods in 318 block	HotRodDave	02/19/12 05:40 PM
Re: 360 rods in 318 block	RapidRobert	02/19/12 02:59 PM
Re: 360 rods in 318 block	Dusted_Ya	02/20/12 07:40 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1