Quote:

OK. I stand corrected.
But to the original poster's question we still did not make a 318 into a 340.
Bigger? Yes
Smaller? Yes.
BTW I was unaware that there was a change in the 318/360 to make parts interchangable. Did this happen in the mid eighties or on the magnum motors?



mag rods are thinner on the small end.

IIRC the change over when they droped the 273 with floating pins,not sure,never had any of the early rods myself.

Last edited by scratchnfotraction; 02/19/12 12:15 PM.