1969 B body manual disc brakes help

Print Thread

Re: 1969 B body manual disc brakes help [Re: ] #1181715 02/20/12 01:07 PM 02/20/12 01:07 PM
Joined: Nov 2003 Posts: 2,715 closer to Canadian beer! torkrules I'm neurotic
torkrules I'm neurotic Joined: Nov 2003 Posts: 2,715 closer to Canadian beer!	Quote: Ok, here is my dillema. I want to run a factory mopar style disc brake set up on my car with 10 inch rear drums and a 1969 B body manual master cylinder. Is there any simple type swap that I can do to make that happen? Im ok with running a 1970 and newer spindle, rotor and caliper set up. The issue is that I have to run a 1969 B body manual master cylinder for sure. Any help would be great What I did was use the rotors,calipers, and lower control arms from a 70 B body. It uses a different sway bar and mount so the calipers don't interfere with outer mounts of the sway bar. You need to use a master cylinder without the residual valve. I used the newer style Mopar master cylinder (the flat one, not the angled one)

Entire Thread
Subject	Posted By	Posted
1969 B body manual disc brakes help	Anonymous	02/18/12 10:59 PM
Re: 1969 B body manual disc brakes help	can.al	02/19/12 12:03 AM
Re: 1969 B body manual disc brakes help	Joshs68	02/19/12 01:27 AM
Re: 1969 B body manual disc brakes help	gtx6970	02/19/12 01:28 AM
Re: 1969 B body manual disc brakes help	moparbuff	02/19/12 03:46 AM
Re: 1969 B body manual disc brakes help	70440+6bbl	02/19/12 04:32 AM
Re: 1969 B body manual disc brakes help	therocks	02/19/12 12:02 PM
Re: 1969 B body manual disc brakes help	Anonymous	02/19/12 03:57 PM
Re: 1969 B body manual disc brakes help	1MYTGTX	02/19/12 04:51 PM
Re: 1969 B body manual disc brakes help	gtx6970	02/19/12 04:56 PM
Re: 1969 B body manual disc brakes help	torkrules	02/20/12 05:07 PM

Hop To