Intake for a TQ - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Intake for a TQ

Print Thread

Re: Intake for a TQ [Re: old340dog] #1176895 02/12/12 01:47 PM 02/12/12 01:47 PM
Joined: Jan 2003 Posts: 15,976 Chilliwack B.C. Canada R RUNCHARGER I Live Here
RUNCHARGER I Live Here R Joined: Jan 2003 Posts: 15,976 Chilliwack B.C. Canada	I don't think the Performer intake is any better than the factory iron piece. It's lighter though. The factory iron intake is actually better than a lot of aluminum intakes truth be known. The LD340 is a good choice and with light clearancing the TQ can bolt right on. Sheldon

Entire Thread
Subject	Posted By	Posted
Intake for a TQ	old340dog	02/12/12 02:49 PM
Re: Intake for a TQ	feets	02/12/12 03:53 PM
Re: Intake for a TQ	LS-300	02/12/12 04:21 PM
Re: Intake for a TQ	scratchnfotraction	02/12/12 04:29 PM
Re: Intake for a TQ	RUNCHARGER	02/12/12 05:47 PM
Re: Intake for a TQ	ScottSmith_Harms	02/12/12 05:52 PM
Re: Intake for a TQ	feets	02/12/12 06:02 PM
Re: Intake for a TQ	RUNCHARGER	02/12/12 06:17 PM
Re: Intake for a TQ	AdamR	02/12/12 06:31 PM
Re: Intake for a TQ	RUNCHARGER	02/12/12 07:10 PM
Re: Intake for a TQ	dOc !	02/12/12 07:14 PM
Re: Intake for a TQ	ScottSmith_Harms	02/12/12 07:16 PM
Re: Intake for a TQ	HotRodDave	02/12/12 07:17 PM
Re: Intake for a TQ	70AARcuda	02/12/12 08:35 PM
Re: Intake for a TQ	forphorty	02/12/12 09:48 PM
Re: Intake for a TQ	dogdays	02/13/12 06:02 PM
Re: Intake for a TQ	MrSixpack	02/13/12 10:22 PM
Re: Intake for a TQ	old340dog	02/13/12 10:43 PM
Re: Intake for a TQ	dogdays	02/13/12 10:49 PM
Re: Intake for a TQ	JonC	02/13/12 11:23 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1