Ballist resistor overheating

Print Thread

Re: Ballist resistor overheating [Re: cudarroger] #1172735 02/06/12 04:07 AM 02/06/12 04:07 AM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	Quote: I am lost on this one. 70 aar factory 340 dual points. The car will start and idle fine and the ballist resistor heats up and the ignition starts breaking up and the car dies and burns out the condenser. Is there back feed from somewhere? All suggestions are appreciated. How is the condenser burnt out? Is it shorting out? That would make the ballast run hot.

Entire Thread
Subject	Posted By	Posted
Ballist resistor overheating	cudarroger	02/05/12 10:51 PM
Re: Ballist resistor overheating	DAYCLONA	02/06/12 12:18 AM
Re: Ballist resistor overheating	RapidRobert	02/06/12 12:18 AM
Re: Ballist resistor overheating	cudarroger	02/06/12 04:39 AM
Re: Ballist resistor overheating	RapidRobert	02/06/12 04:43 AM
Re: Ballist resistor overheating	DAYCLONA	02/06/12 07:33 AM
Re: Ballist resistor overheating	dynorad	02/06/12 05:07 AM
Re: Ballist resistor overheating	451Mopar	02/06/12 08:07 AM
Re: Ballist resistor overheating	cudarroger	02/06/12 03:27 PM
Re: Ballist resistor overheating	dynorad	02/07/12 10:38 PM
Re: Ballist resistor overheating	phantomx	02/08/12 03:01 AM

Hop To