w9 cnc heads(Up date flow #s)

Print Thread

Re: w9 cnc heads [Re: 440W8 Duster] #1140640 02/10/12 11:34 AM 02/10/12 11:34 AM
Joined: Jan 2003 Posts: 1,784 PA W5DART66 OP top fuel
W5DART66 OP top fuel Joined: Jan 2003 Posts: 1,784 PA	Quote: What is the CSA of the intake port and volume?Thanks Brett Looks good. Just over 3in at flange.

Entire Thread
Subject	Posted By	Posted
w9 cnc heads(Up date flow #s)	W5DART66	12/21/11 04:10 PM
Re: w9 cnc heads	W5DART66	12/21/11 04:11 PM
Re: w9 cnc heads	ZIPPY	12/21/11 04:44 PM
Re: w9 cnc heads	MR_P_BODY	12/21/11 05:08 PM
Re: w9 cnc heads	W5DART66	12/21/11 06:10 PM
Re: w9 cnc heads	MR_P_BODY	12/22/11 03:13 AM
Re: w9 cnc heads	Troy	12/21/11 06:43 PM
Re: w9 cnc heads	W5DART66	12/21/11 07:09 PM
Re: w9 cnc heads	Dos Snails	12/22/11 02:37 AM
Re: w9 cnc heads	Evil Spirit	12/22/11 03:41 AM
Re: w9 cnc heads	Troy	12/22/11 05:40 AM
Re: w9 cnc heads	Otherlane	01/24/12 02:29 PM
Re: w9 cnc heads	W5DART66	01/25/12 01:55 AM
Re: w9 cnc heads	Dos Snails	01/25/12 02:42 AM
Re: w9 cnc heads	W5DART66	01/25/12 03:09 AM
Re: w9 cnc heads	Dos Snails	01/25/12 03:58 AM
Re: w9 cnc heads	Otherlane	01/25/12 01:58 PM
Re: w9 cnc heads	W5DART66	01/25/12 03:07 PM
Re: w9 cnc heads	Leon441	01/25/12 11:24 PM
Re: w9 cnc heads	W5DART66	01/25/12 11:35 PM
Re: w9 cnc heads	WHITEDART	01/26/12 01:23 AM
Re: w9 cnc heads	BPE	01/26/12 01:27 AM
Re: w9 cnc heads	WHITEDART	01/26/12 01:58 AM
Re: w9 cnc heads	Hot 340	01/26/12 01:41 AM
Re: w9 cnc heads	W5DART66	01/26/12 02:35 AM
Re: w9 cnc heads	Stroker Scamp	01/26/12 08:18 AM
Re: w9 cnc heads	Jacob Pitt	01/26/12 01:54 PM
Re: w9 cnc heads	Dos Snails	02/02/12 02:06 AM
Re: w9 cnc heads	MoparVin	02/02/12 05:38 PM
Re: w9 cnc heads	Biginchmopar	02/02/12 06:11 PM
Re: w9 cnc heads	Brian Hafliger	02/05/12 05:00 AM
Re: w9 cnc heads	W5DART66	02/09/12 05:03 PM
Re: w9 cnc heads	W5DART66	02/09/12 06:07 PM
Re: w9 cnc heads	W5DART66	02/09/12 06:07 PM
Re: w9 cnc heads	S/ST 3040	02/09/12 06:13 PM
Re: w9 cnc heads	StrokerAspen	02/09/12 06:39 PM
Re: w9 cnc heads	Biginchmopar	02/10/12 05:29 AM
Re: w9 cnc heads	W5DART66	02/10/12 11:54 AM
Re: w9 cnc heads	440W8 Duster	02/10/12 01:40 PM
Re: w9 cnc heads	W5DART66	02/10/12 03:34 PM
Re: w9 cnc heads	Leon441	02/10/12 04:32 PM
Re: w9 cnc heads	Biginchmopar	02/10/12 05:35 PM
Re: w9 cnc heads	Biginchmopar	02/10/12 05:37 PM
Re: w9 cnc heads	Otherlane	02/11/12 12:18 AM
Re: w9 cnc heads	Biginchmopar	02/14/12 07:04 AM
Re: w9 cnc heads	W5DART66	02/15/12 03:47 AM
Re: w9 cnc heads	Otherlane	02/15/12 04:25 AM
Re: w9 cnc heads	Biginchmopar	02/15/12 07:26 AM
Re: w9 cnc heads	Otherlane	02/15/12 01:27 PM
Re: w9 cnc heads	W5DART66	02/15/12 01:50 PM
Re: w9 cnc heads	fishy340	02/15/12 03:21 PM
Re: w9 cnc heads	Dave W	02/15/12 05:25 PM
Re: w9 cnc heads	W5DART66	02/15/12 05:39 PM
Re: w9 cnc heads	W5DART66	02/15/12 05:41 PM
Re: w9 cnc heads	W5DART66	02/15/12 05:42 PM
Re: w9 cnc heads	sshemi	02/15/12 07:39 PM
Re: w9 cnc heads	Dave W	02/15/12 07:57 PM
Re: w9 cnc heads	W5DART66	02/16/12 12:53 AM
Re: w9 cnc heads	Dave W	02/16/12 02:04 AM
Re: w9 cnc heads	Dos Snails	02/16/12 02:58 AM
Re: w9 cnc heads	W5DART66	02/16/12 03:01 AM
Re: w9 cnc heads	Dos Snails	02/16/12 03:10 AM
Re: w9 cnc heads	Stroker Scamp	02/18/12 03:51 AM
Re: w9 cnc heads	dodgeboy11	02/16/12 03:47 AM
Re: w9 cnc heads	Biginchmopar	02/16/12 06:37 PM
Re: w9 cnc heads	W9 Dart	02/19/12 06:56 AM
Re: w9 cnc heads	Biginchmopar	02/20/12 06:54 AM
Re: w9 cnc heads	W5DART66	02/28/12 06:04 AM
Re: w9 cnc heads	W5DART66	02/28/12 06:06 AM
Re: w9 cnc heads	Otherlane	02/28/12 12:25 PM
Re: w9 cnc heads	W5DART66	02/28/12 03:32 PM
Re: w9 cnc heads	Scamp451	02/28/12 08:44 PM
Re: w9 cnc heads	W5DART66	02/28/12 09:40 PM
Re: w9 cnc heads	Hitman340	02/29/12 12:49 AM
Re: w9 cnc heads	Dos Snails	02/29/12 02:50 AM
Re: w9 cnc heads	W5DART66	02/29/12 05:21 AM
Re: w9 cnc heads	W5DART66	02/29/12 05:33 AM
Re: w9 cnc heads	rt66jim	10/31/12 08:52 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To