No thats not what im refering to, I wouldnt trust that plate and look at the link here...

This is when I plumbed my direct port and used this spacer, along with my 1/2 inch plate kit. I let him use my pic.

Im using a spacer as shown in the link, just as the NOS brand kits its only the outter carbs for the foggers esp since on the mod man the ports are directly below.

Also using the plate in the link you can countersink the fogger to the tip depth you want it to be.

Only thing is to watch your butterfly clearence to the tip if your stuck for room.

I will try to post pics tonight so its understood better.


Also working on a plate that has most of the internal plumbing that would take the place of the fuel blocks.