|
Re: Will more piston 2 wall clearance cause premature wear?
[Re: jvcuda]
#1118225
11/21/11 12:48 PM
11/21/11 12:48 PM
|
Joined: Jan 2003
Posts: 9,670 Lima, Peru
domingo
OP
EL Master
|
OP
EL Master
Joined: Jan 2003
Posts: 9,670
Lima, Peru
|
Quote:
Quote:
Hi,
Im putting together a stock 440 and im using KB forged pistons on it. I decided to go with a looser sidewall clearance because I do intend to drag race it every now and then, but it will also be used on the street.
I went with ,0070"
Will this cause premature wear, or is it only that it will be noisy on startup but wear is not really an issue?
Too loose for the street for me Check KB's installation instructions: KB Piston Installation
john
Well, its within spec for drag gasoline. just middle ground at 0,0070". Maybe too loose because it will need a bit to warm out and stop slap, but it is within spec.....right?
D
|
|
|
|
|
|