motor plate or solid mount - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech motor plate or solid mount

Print Thread

Re: motor plate or solid mount [Re: an8sec70cuda] #1106725 11/04/11 10:41 AM 11/04/11 10:41 AM
Joined: Jan 2003 Posts: 642 New Jersey Craig mopar
Craig mopar Joined: Jan 2003 Posts: 642 New Jersey	Supposedly, mounts cost power compared to a plate due to cylinder wall flex and reduced ring seal. Not sure what power levels this would begin at though. 67 Dart, 426 Hemi, 9.23/145mph, 3400lbs, footbraked, owned since 1982

Entire Thread
Subject	Posted By	Posted
motor plate or solid mount	bodyworks racing	11/03/11 10:57 PM
Re: motor plate or solid mount	70satelliteguy	11/03/11 11:57 PM
Re: motor plate or solid mount	bodyworks racing	11/04/11 02:07 AM
Re: motor plate or solid mount	barracudabob	11/04/11 02:48 AM
Re: motor plate or solid mount	383man	11/04/11 05:59 AM
Re: motor plate or solid mount	Dragula	11/04/11 11:44 AM
Re: motor plate or solid mount	an8sec70cuda	11/04/11 12:53 PM
Re: motor plate or solid mount	bonefish	11/04/11 01:47 PM
Re: motor plate or solid mount	an8sec70cuda	11/04/11 01:58 PM
Re: motor plate or solid mount	bodyworks racing	11/04/11 02:16 PM
Re: motor plate or solid mount	tboomer	11/04/11 02:17 PM
Re: motor plate or solid mount	bonefish	11/04/11 02:22 PM
Re: motor plate or solid mount	bodyworks racing	11/04/11 05:51 PM
Re: motor plate or solid mount	an8sec70cuda	11/04/11 02:34 PM
Re: motor plate or solid mount	Craig	11/04/11 02:41 PM
Re: motor plate or solid mount	nhramark	11/04/11 04:17 PM
Re: motor plate or solid mount	nhramark	11/04/11 04:33 PM
Re: motor plate or solid mount	nhramark	11/04/11 04:36 PM
Re: motor plate or solid mount	bodyworks racing	11/04/11 05:53 PM
Re: motor plate or solid mount	RemCharger	11/04/11 06:11 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1