roller cam bearings 50 mm small block

Print Thread

Re: roller cam bearings 50 mm small block [Re: MR_P_BODY] #1099318 10/22/11 08:15 PM 10/22/11 08:15 PM
Joined: Oct 2011 Posts: 3,036 bean town ....Ca W WHITEDART OP master
WHITEDART OP master W Joined: Oct 2011 Posts: 3,036 bean town ....Ca	im not shure but im thinkin through push rods but the lifter bore have not been drill for oil ethere have to get it to the shop this week In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb

Entire Thread
Subject	Posted By	Posted
roller cam bearings 50 mm small block	WHITEDART	10/22/11 10:54 PM
Re: roller cam bearings 50 mm small block	MCHBOB	10/22/11 11:23 PM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/22/11 11:24 PM
Re: roller cam bearings 50 mm small block	WHITEDART	10/22/11 11:35 PM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 12:03 AM
Re: roller cam bearings 50 mm small block	WHITEDART	10/23/11 12:15 AM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 12:30 AM
Re: roller cam bearings 50 mm small block	WHITEDART	10/23/11 06:22 AM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 06:27 AM
Re: roller cam bearings 50 mm small block	tubtar	10/23/11 08:13 AM
Re: roller cam bearings 50 mm small block	tubtar	10/23/11 08:14 AM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 02:54 PM

Hop To