roller cam bearings 50 mm small block

Print Thread

roller cam bearings 50 mm small block #1099313 10/22/11 06:54 PM 10/22/11 06:54 PM
Joined: Oct 2011 Posts: 3,036 bean town ....Ca W WHITEDART OP master
WHITEDART OP master W Joined: Oct 2011 Posts: 3,036 bean town ....Ca	i just was looking at my ritter XR1 Block and it dose not have oil feeds holes to the cam bearings do those have to be drilled out for roller bearings in the past i have used stock blocks they have all had oil holes.. LOOKING FOR HELP In the 8s N/A.with Brett miller W8's 5.07 at 133 at 2700lb

Entire Thread
Subject	Posted By	Posted
roller cam bearings 50 mm small block	WHITEDART	10/22/11 10:54 PM
Re: roller cam bearings 50 mm small block	MCHBOB	10/22/11 11:23 PM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/22/11 11:24 PM
Re: roller cam bearings 50 mm small block	WHITEDART	10/22/11 11:35 PM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 12:03 AM
Re: roller cam bearings 50 mm small block	WHITEDART	10/23/11 12:15 AM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 12:30 AM
Re: roller cam bearings 50 mm small block	WHITEDART	10/23/11 06:22 AM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 06:27 AM
Re: roller cam bearings 50 mm small block	tubtar	10/23/11 08:13 AM
Re: roller cam bearings 50 mm small block	tubtar	10/23/11 08:14 AM
Re: roller cam bearings 50 mm small block	MR_P_BODY	10/23/11 02:54 PM

Hop To