Quote:

No it is going from fourth to third. The same clutch comes back on in third (direct clutch) as it is also on in first. First is the direct clutch and the low/reverse clutch and fourth is the overdrive clutch and 2/4 clutch. Third it the overdrive clutch and the direct clutch and it is the direct clutch that will run the cvi's high if it is delayed in first sometimes. It wont learn to fix itself if it has that problem. Thats why setting the Quicklearn resets all the clutch cvi's and will make the direct clutch come on normal. It will learn to apply faster (harder) if the pump causes the delay and does not apply the direct clutch right away. It uses pressure switches to know when the clutches apply and if one takes to long it will cycle the solenoid faster to apply it faster which when it applies to fast it will bang. Good luck , Ron



I know,I was responding to another member who thought I said it was going from 4th to first.

87 D100 225 4 speed.