Quote:

I have a Lokar cable on it, and it just doesn't seem to be consistent. Is there a linkage that will work ok with the following?
360/904/RPM/Holley 650 mech linkage



No issues with mine other than it slips once in a while. Bracket design from Edelbrock isn't the best...I also added a spring down on the trans that helped, so there is one below from a bracket to the kick-down cable not seen up top.


Last edited by Dragula; 09/20/11 09:31 AM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk