Edlebrock RPM dual plane/Holley 650 DP kick down?

Posted By: da50r

Edlebrock RPM dual plane/Holley 650 DP kick down? - 09/20/11 04:21 AM

I have a Lokar cable on it, and it just doesn't seem to be consistent. Is there a linkage that will work ok with the following?
360/904/RPM/Holley 650 mech linkage

Posted By: joedust451

Re: Edlebrock RPM dual plane/Holley 650 DP kick down? - 09/20/11 05:23 AM

Quote:

I have a Lokar cable on it, and it just doesn't seem to be consistent. Is there a linkage that will work ok with the following?
360/904/RPM/Holley 650 mech linkage

I was able to hook up my factory 318 kickdown linkage, but i had to build up the bracket that bolts on the intake, I lifted it up 2", you must use the throttle adapter from holley for it to work good, Anymore i just install a MVB & problem solved, plus the tranny shifts sooooo much better.

Posted By: Dragula

Re: Edlebrock RPM dual plane/Holley 650 DP kick down? - 09/20/11 01:30 PM

Quote:

I have a Lokar cable on it, and it just doesn't seem to be consistent. Is there a linkage that will work ok with the following?
360/904/RPM/Holley 650 mech linkage

No issues with mine other than it slips once in a while. Bracket design from Edelbrock isn't the best...I also added a spring down on the trans that helped, so there is one below from a bracket to the kick-down cable not seen up top.