Stamped steel BB rocker arm ratio?

Print Thread

Re: Stamped steel BB rocker arm ratio? [Re: Junky] #107546 08/20/08 01:54 AM 08/20/08 01:54 AM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	Check out the tech article from Hughes Engines: http://www.hughesengines.com/general/techArticleDetail.asp?articleID=1000046 Besides the bad ratios and non-adjustability, the pushrod can break through rocker if your using stiffer valve springs.

Entire Thread
Subject	Posted By	Posted
Stamped steel BB rocker arm ratio?	Junky	08/20/08 02:57 AM
Re: Stamped steel BB rocker arm ratio?	383man	08/20/08 05:39 AM
Re: Stamped steel BB rocker arm ratio?	451Mopar	08/20/08 05:54 AM
Re: Stamped steel BB rocker arm ratio?	Junky	08/20/08 06:10 PM
Re: Stamped steel BB rocker arm ratio?	patrick	08/20/08 06:49 PM
Re: Stamped steel BB rocker arm ratio?	Junky	08/20/08 07:04 PM
Re: Stamped steel BB rocker arm ratio?	MoparforLife	08/20/08 07:34 PM
Re: Stamped steel BB rocker arm ratio?	Black_Sheep	08/20/08 07:41 PM
Re: Stamped steel BB rocker arm ratio?	maximum entropy	08/20/08 08:16 PM
Re: Stamped steel BB rocker arm ratio?	Junky	08/20/08 09:38 PM
Re: Stamped steel BB rocker arm ratio?	6PakBee	08/20/08 09:43 PM
Re: Stamped steel BB rocker arm ratio?	BSB67	08/20/08 11:12 PM
Re: Stamped steel BB rocker arm ratio?	lewtot184	08/20/08 11:45 PM
Re: Stamped steel BB rocker arm ratio?	MoparforLife	08/21/08 12:34 AM
Re: Stamped steel BB rocker arm ratio?	dogdays	08/21/08 02:17 PM
Re: Stamped steel BB rocker arm ratio?	MoparforLife	08/21/08 02:24 PM
Re: Stamped steel BB rocker arm ratio?	6PakBee	08/21/08 03:04 PM
Re: Stamped steel BB rocker arm ratio?	MoparforLife	08/21/08 03:12 PM

Hop To