without removing the intake..I did take off the valve covers and discovered one of my exhaust valves was getting little if any movement
from the lifter. With the engine (360) running, when I pushed back on the rocker arm toward the push rod it was jumping some.With the engine OFF the push rod would move towards the lifter and spring back when let go.Im guessing/hoping that the lifter collapsed.This was on a fairly new Lunaty Voodoo cam and lifter installation less than 50 miles. I hope I broke it in right and proper,but had no tack on it to get to my 1200 rpms during break in.Removing the intake will tell the tale when I look at the lobe of the cam.But just wanted to see what the experts here have to say first.I'm afraid to look. LOL MAN that was making a loud popping through the carb