440 head gaskets

Print Thread

Re: 440 head gaskets [Re: JohnRR] #1049844 08/10/11 11:47 AM 08/10/11 11:47 AM
Joined: Jan 2003 Posts: 754 Longview, Texas marvo451 super stock
marvo451 super stock Joined: Jan 2003 Posts: 754 Longview, Texas	A good way to "guesstimate" the amount of milling is to measure the outside head bolt boss. Stock it is very close to 1.00 inch.

Entire Thread
Subject	Posted By	Posted
440 head gaskets	68CoronetRT	08/09/11 03:15 PM
Re: 440 head gaskets	JohnRR	08/09/11 03:18 PM
Re: 440 head gaskets	therocks	08/09/11 03:19 PM
Re: 440 head gaskets	Mr.Yuck	08/09/11 03:40 PM
Re: 440 head gaskets	JohnRR	08/09/11 05:47 PM
Re: 440 head gaskets	Mr.Yuck	08/09/11 06:17 PM
Re: 440 head gaskets	68CoronetRT	08/09/11 07:04 PM
Re: 440 head gaskets	joelson6	08/11/11 02:51 AM
Re: 440 head gaskets	JohnRR	08/09/11 08:03 PM
Re: 440 head gaskets	Mr.Yuck	08/10/11 01:51 PM
Re: 440 head gaskets	JohnRR	08/10/11 03:38 PM
Re: 440 head gaskets	marvo451	08/10/11 03:47 PM
Re: 440 head gaskets	Mr.Yuck	08/10/11 03:57 PM
Re: 440 head gaskets	JohnRR	08/10/11 07:08 PM
Re: 440 head gaskets	68CoronetRT	08/10/11 07:24 PM
Re: 440 head gaskets	Thumperdart	08/10/11 04:03 PM
Re: 440 head gaskets	buck440	08/18/11 12:13 AM
Re: 440 head gaskets	CrAzYMoPaRGuY	08/09/11 06:04 PM
Re: 440 head gaskets	steeldust	08/11/11 03:54 AM
Re: 440 head gaskets	68CoronetRT	08/14/11 02:39 AM
Re: 440 head gaskets	68CoronetRT	08/15/11 08:07 PM
Re: 440 head gaskets	JohnRR	08/16/11 02:42 PM
Re: 440 head gaskets	68CoronetRT	08/18/11 06:21 PM
Re: 440 head gaskets	marvo451	08/18/11 06:48 PM
Re: 440 head gaskets	JohnRR	08/20/11 01:10 PM
Re: 440 head gaskets	68CoronetRT	08/20/11 02:39 PM
Re: 440 head gaskets	Mike Swann	08/18/11 01:09 AM
Re: 440 head gaskets	ahy	08/18/11 01:14 AM
Re: 440 head gaskets	Get-X	08/20/11 02:47 PM
Re: 440 head gaskets	68CoronetRT	08/20/11 06:00 PM
Re: 440 head gaskets	Von	08/20/11 09:57 PM
Re: 440 head gaskets	68CoronetRT	08/20/11 11:56 PM
Re: 440 head gaskets	JohnRR	08/21/11 04:23 PM
Re: 440 head gaskets	68CoronetRT	08/21/11 11:55 PM
Re: 440 head gaskets	JohnRR	08/23/11 01:43 PM
Re: 440 head gaskets	68CoronetRT	08/23/11 03:39 PM
Re: 440 head gaskets	JohnRR	08/23/11 04:00 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To