Cutting down an 8 3/4. Cut and splice or new flanges?

Print Thread

Re: Cutting down an 8 3/4. Cut and splice or new flanges? [Re: VITC_GTX] #1030393 07/11/11 09:28 PM 07/11/11 09:28 PM
Joined: Jan 2003 Posts: 25,866 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,866 Rio Linda, CA	Most of the available new flanges only work with Green (ball) bearings, if the old ones are good reuse them for sure. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
Cutting down an 8 3/4. Cut and splice or new flanges?	VITC_GTX	07/12/11 12:20 AM
Re: Cutting down an 8 3/4. Cut and splice or new flanges?	RV2	07/12/11 12:32 AM
Re: Cutting down an 8 3/4. Cut and splice or new flanges?	John_Kunkel	07/12/11 01:28 AM
Re: Cutting down an 8 3/4. Cut and splice or new flanges?	VITC_GTX	07/12/11 03:21 AM
Re: Cutting down an 8 3/4. Cut and splice or new flanges?	dragaddict	07/13/11 05:29 AM

Hop To