Quote:

---

Quote:

---

The deck hieght is -.009 on one number 1 and right at +.003 on number 6

---

so your going to assemble the engine like that?, really?

---

It is assemble now, am I going to run it that way, I don't know I haven't made that decision yet, I will decide after measuring the rest of the deck hieghts and see if the machine shop cut the block wrong or if it caused by the rod , piston or stroke differences If it is the block I will probally try and use a different thickness head gasket, if it is a rod or piston I will fix it, if it is the stroke, I don't know yet