OK gang I need some advise. I have a 440 six pack in my Cuda thats been sitting for years. The carbs are leaking out of the gasket noted in the pics below on one of the outboard carbs and from under the the center carb at the power valve( I think).

In any case, I need to clean them up and replace the gasket in question and while I am in there I guess the power valve too.

I attemoted to take the carbs to the local auto parts places but they do not stock them and seemed lost in looking for the parts.

So my question is, can I buy just the parts needed, if so, who sells them at a decent price, or do I have to buy total rebuild kits to get the parts I need?

if so, are these the 3-396 kits and any idea if the power valve is included or what the part number is for the valve?

This is a newer set of carb that I bought during the build, maybe 10 years ago or a bit longer, not old original carbs.

I need to get then quick and get this thing up and running.

thanks for any advise in advance.

Dave
need the right pic.