Original Poster Quote:
It's a 23 spline and all I want to do is change the input shaft bearing. I was hoping to confirm if I could just unbolt the front bearing retainer and switch the bearing out.
JohnRR
Quote:
Maybe it's the the fact that the input shaft won't come out the front on a 23 spline that I was able to pull the bearing off without disassembling the trans, I popped off the snap rings and used 2 screw drivers against the case and was able to pull off the bearing.
JohnRR
Quote:
No you can't just swap it like that, would be nice if one could but it's not that easy.
Which JohnRR do I agree with?  or is it disagree with? Oh heck I don't know.
In theory, there is no difference between theory and practice. In practice, there is.
| 
