Posted By: MOPARMIKE69
Location of the 2 feet on the Shaker breather - 08/19/19 04:26 PM
Anybody have a picture of where the two rubber coated feet mount to the "Shaker" breather base? They are supposed to rest on the valve covers. Are they welded on or bolted on? Thanks for any help.
Posted By: Sammy
Re: Location of the 2 feet on the Shaker breather - 08/19/19 04:37 PM
The feet are tack welded to the bottom of the baseplate.
IIRC there are 2 tiny impressions for you to weld at.
Once welded drop baseplase and lower the 2 piece bracket down so they touch the valve covers then tighten up the nut.
Posted By: floyd
Re: Location of the 2 feet on the Shaker breather - 08/19/19 06:12 PM
I think this old post will answer many of your questions. What engine do you have?
https://board.moparts.org/ubbthread...mi-shaker-base-feet-location-needed.html
Posted By: MOPARMIKE69
Re: Location of the 2 feet on the Shaker breather - 08/20/19 01:49 PM
426 Hemi
Thanks for the link.