03

we also put new inner fenders in, and have used insert-nuts throughout the body so there aren't any rusty washers/nuts/clips around in the future..

we filled the marker lights all corners:

-=

//

\

\\

)

The rear wheel tyre combo required that I widen/deepen the rear wheel area to accommodate the tyres. They're 345/30x19 Michelin Pilot PS2's. 13" Budnik Ice rims.

other side

rh wheel well:

lh side

..modifications to trunk supports (..in progress here)

lh support..

..moved in the inner fender flush with the chassis rail:

what the wheel well looks like finished with wheel on:

next was the sills. we took them off cleaned & sealed everything up. new sills.:

other side:

new door hinges, we actually unstitched the plenum chamber and sealed it all up too:

..after fitting the front guards we decided they were in pretty cr%$ppy condition: