440-1 / 572-13 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 440-1 / 572-13

Print Thread

Page 2 of 2

1

2

Re: 440-1 / 572-13 [Re: Rich970] #904751 01/18/11 11:57 PM 01/18/11 11:57 PM
Joined: Mar 2006 Posts: 1,229 In The Hills J jughed pro stock
jughed pro stock J Joined: Mar 2006 Posts: 1,229 In The Hills	Quote: has that intake been gasket matched before ? my heads and intake have been matched to the -1 gasket and when i lay the -13 gasket on them most of the work is on the side moving the port twards the bolt holes and very little to the top. your heads look great. thanks!!! the intake has never been gasket matched. here's a closer pic to show how much gasket needs trimmed... 6426305-019.JPG (76 downloads)

Re: 440-1 / 572-13 [Re: jughed] #904752 01/19/11 04:15 AM 01/19/11 04:15 AM
Joined: Dec 2009 Posts: 151 ohio R Rich970 OP member
Rich970 OP member R Joined: Dec 2009 Posts: 151 ohio	Quote: Quote: has that intake been gasket matched before ? my heads and intake have been matched to the -1 gasket and when i lay the -13 gasket on them most of the work is on the side moving the port twards the bolt holes and very little to the top. your heads look great. thanks!!! the intake has never been gasket matched. here's a closer pic to show how much gasket needs trimmed... Thanks that look great i am sold. whats is it going in ? 6426664-1228001237.jpg (59 downloads) 69 Dart http://www.youtube.com/watch?v=NbLTFtHY57E

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1