|
|
|
Re: 440 or 451 stroker?
[Re: JohnRR]
#863545
11/29/10 06:53 PM
11/29/10 06:53 PM
|
Joined: Apr 2008
Posts: 1,285
Pacific NW USA
CompSyn
pro stock
|
pro stock
Joined: Apr 2008
Posts: 1,285
Pacific NW USA
|
Quote:
Don't notch the bottom of the bore unless you are using LEAD pistons, otherwise you'll end up with swiss cheese looking counterweights to balance it for the stroker , after cutting mine it only needed a couple small shallow holes to balance .
John,
What pistons did you end up using?
|
|
|
Re: 440 or 451 stroker?
[Re: CompSyn]
#863546
11/29/10 09:26 PM
11/29/10 09:26 PM
|
Joined: Jan 2003
Posts: 75,112
A Banana Republic near you.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,112
A Banana Republic near you.
|
Quote:
Quote:
Don't notch the bottom of the bore unless you are using LEAD pistons, otherwise you'll end up with swiss cheese looking counterweights to balance it for the stroker , after cutting mine it only needed a couple small shallow holes to balance .
John,
What pistons did you end up using?
I used diamond pistons with a 1.320 CH , they were under 600 grams , I want to say 650ish with the pin
|
|
|
|
|
|
|
