|
******Dart Update ******IN CAR VIDEO PASS added******
#856659
11/18/10 08:55 AM
11/18/10 08:55 AM
|
Joined: Mar 2006
Posts: 5,067
Orlando Florida
blown572dart
OP
master
|
OP
master
Joined: Mar 2006
Posts: 5,067
Orlando Florida
|
after years of work I just Can't tell you all how glad I am to say that barring any major complications we are FINALLY going to the track to make some hits on the car. I will say that it has been a long MF road to get here and hopefully all goes well. Thanks to those that took many hours of their time to help get here I truly appreciate all you have done for me. Mike Roth I really owe you a ton of gratitude for all the help with parts pieces and everything in between. Thank you with out your help and support I could not have done it.  I would also like to thank all of you that through the last few years have kept me going with the kind words and moral support when I could have given up. Jimmy 
Last edited by blown572dart; 11/29/10 02:21 PM.
|
|
|
Re: ****Dart Update******* Well after years of work I just
[Re: blown572dart]
#856661
11/18/10 09:05 AM
11/18/10 09:05 AM
|
Joined: Sep 2003
Posts: 1,138
San Angelo, Texas
W8n2DustU
super stock
|
super stock
Joined: Sep 2003
Posts: 1,138
San Angelo, Texas
|
Congrats Jimmy. You have an amazing car there. Something to truly be proud of! Now quit staring at it and go pull some freakin gears already! Oh yea, VIDEO is a must.....
2010 Toxic Orange Challenger built by B and B Racecars! All aluminum R4/P5 engine, Proformance TH400 (3 speed) tranny, full Reid case, nodular 9" rearend, full Dragpak suspension, Protorque custom converter, BS3, PTE 85mm turbo, fire core wires, carbon doors, carbon front clip, and a whole lot more!
|
|
|
Re: ****Dart Update******* Well after years of work I just
[Re: blown572dart]
#856663
11/18/10 09:07 AM
11/18/10 09:07 AM
|
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL
Senior Member of the Junior Dragster Club
|
Senior Member of the Junior Dragster Club
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
|
Good luck Jimmy.
It's been a long road for you and I appluad your determination through the set backs.
I wish you all the best on the track tests as you really don't need any more drama. 
|
|
|
Re: ****Dart Update******* Well after years of work I just
[Re: blown572dart]
#856668
11/18/10 09:58 AM
11/18/10 09:58 AM
|
Joined: Oct 2006
Posts: 4,590
Indy
joshking440
Lunch is on me!
|
Lunch is on me!
Joined: Oct 2006
Posts: 4,590
Indy
|
Quote:
Can't tell you all how glad I am to say that barring any major complications we are FINALLY going to the track to make some hits on the car. I will say that it has been a long MF road to get here and hopefully all goes well.
Thanks to those that took many hours of their time to help get here I truly appreciate all you have done for me.
Mike Roth I really owe you a ton of gratitude for all the help with parts pieces and everything in between. Thank you with out your help and support I could not have done it.
I would also like to thank all of you that through the last few years have kept me going with the kind words and moral support when I could have given up.
Jimmy
|
|
|
Re: ****Dart Update******* Well after years of work I just
[Re: blown572dart]
#856670
11/18/10 11:39 AM
11/18/10 11:39 AM
|
Joined: Nov 2004
Posts: 3,547
Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,547
Syracuse,NY
|
and you thought the BUILD of the car was hard?...  ...now the REAL work begins! Good luck to you, dont be in a hurry to make any glory passes......there is a lot to do yet...the fuel, timing, suspension will take a lot of testing.....glad to see it moving along.The data recorder is EVERYTHING. It will take a knowledgable person to interpret that data to make the neccesary changes. You can never have too much data. A good slow speed video camera will also be money well spent. Is Monte making the preliminary and subsequent tuning runs?
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: ****Dart Update******* Well after years of work I just
[Re: CompWedgeEngines]
#856673
11/18/10 11:59 AM
11/18/10 11:59 AM
|
Joined: Mar 2006
Posts: 5,067
Orlando Florida
blown572dart
OP
master
|
OP
master
Joined: Mar 2006
Posts: 5,067
Orlando Florida
|
Quote:
Is Monte making the preliminary and subsequent tuning runs?
No Monte was tied up and unable to do it. We have Scott Filkins driving and Lonnie Houde tunning. Should be a ton of fun. I have waited a long time and by no means am I in any hurry. Just can't wait to see it make a pass or a few for that matter. Hell seeing it at the track would be a plus
|
|
|
Re: ****Dart Update******* Well after years of work I just
[Re: all spooled up]
#856678
11/18/10 01:56 PM
11/18/10 01:56 PM
|
Joined: Dec 2009
Posts: 21,208
in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 21,208
in a cattle trailer down by th...
|
I want to know when and where too, please tell.
"Come get your wife"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion.
'74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Front and rear disc and hydroboost conversion.
2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
|
|
IMOP the 2 badest cars on MOPARTS are YOU and Dean{GOGREEN) 
^^^^^^^^^
go get it!! 
