Torsion bars which way - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Torsion bars which way

Print Thread

Page 2 of 2

1

2

Re: Torsion bars which way [Re: boydsdodge] #832836 10/20/10 08:26 PM 10/20/10 08:26 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem OP master
Dodgem OP master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	When I pulled them Saturday I'm sure that they had the L and R on both ends but some slighty different numbers. they are going back in tomorrow so I'll right down what the numbers are on both ends and post! sags too much with the drag bars just too heavy a car I guess 3625 ish with me in it!! Last edited by Dodgem; 10/20/10 08:27 PM.

Re: Torsion bars which way [Re: Dodgem] #832837 10/20/10 09:01 PM 10/20/10 09:01 PM
Joined: Jan 2003 Posts: 6,591 Canton, Ohio S Sport440 master
Sport440 master S Joined: Jan 2003 Posts: 6,591 Canton, Ohio	The bars do need to be installed correctly L and R and they will be marked. Except for the 1" and thicker bars. I cant find a #920 bar anywhere. But, there is a .920 diameter bar. The numbers for that are 448,and 9 for the a body and 780 and 1 for the B and E bodies. mike

Re: Torsion bars which way [Re: Dodgem] #832838 10/20/10 10:11 PM 10/20/10 10:11 PM
Joined: Jan 2003 Posts: 31,257 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,257 Oregon	Quote: I had my T bars out to try drag bars and want to put them back in!! They are marked left and right but which way is the back???? (or front??) Thanks in advance!! Original bars have the paint splotches towards the rear of the car. I think that is just to make it easier to ID the car going down the assembly line. Also, original cars have two paint splotches on one side only.

Re: Torsion bars which way [Re: AndyF] #832839 10/20/10 11:51 PM 10/20/10 11:51 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem OP master
Dodgem OP master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	These are MP P5249157 .920 the original .960's are long gone http://chucker54.stores.yahoo.net/torsionbars.html http://chucker54.stores.yahoo.net/mop920diambe.html

Re: Torsion bars which way [Re: Dodgem] #832840 10/21/10 12:07 AM 10/21/10 12:07 AM
Joined: Jan 2003 Posts: 6,591 Canton, Ohio S Sport440 master
Sport440 master S Joined: Jan 2003 Posts: 6,591 Canton, Ohio	Quote: These are MP P5249157 .920 the original .960's are long gone http://chucker54.stores.yahoo.net/torsionbars.html http://chucker54.stores.yahoo.net/mop920diambe.html Then those bars should be stamped 780R and 781L As long as you have them on thier correct sides. It doesnt matter witch way the bar is installed front to back, as the twist will be in the same direction. But since they are aftermarket bars they may be stamped on only one end. If thats the case, you will want to install the stamped end toward the rear for a easy visual identification for you or anybody else for future identification. Further, the "Even" numbered bar is always the ":Right" side bar. mike

Re: Torsion bars which way [Re: Sport440] #832841 10/21/10 03:08 PM 10/21/10 03:08 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem OP master
Dodgem OP master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Ok 781L 780R 237 under line on one end both bars other end 781L 780R T Y under line on other end both bars

Re: Torsion bars which way [Re: Dodgem] #832842 10/24/10 09:01 AM 10/24/10 09:01 AM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem OP master
Dodgem OP master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	OK the .920 bars are back in and I put the ends with the T Y under the 780/781 L and R to the front left in left of course the backs are 780/781 L & R with 237 under to the rear. What a difference When I took them out last Saturday I had somehow got them switched and the Left was in the right side and Right was in the left side and it took all the adjustment to get it to the ride height I wanted. Guess they got switched when I put the motor in last spring as i pulled the bars for more room. Anywho now it only takes about 40 to 50 % of the adjustment to get it to the ride height I want. Thanks for all the help.

Re: Torsion bars which way [Re: Dodgem] #832843 10/24/10 09:11 AM 10/24/10 09:11 AM
Joined: Jan 2003 Posts: 2,158 Hamilton,Ohio P POZEST top fuel
POZEST top fuel P Joined: Jan 2003 Posts: 2,158 Hamilton,Ohio	Moparts tech page

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1