|
|
|
Re: what will it run 418 stroker ?1/8 mile
[Re: all spooled up]
#816796
10/01/10 11:16 PM
10/01/10 11:16 PM
|
Joined: Jan 2003
Posts: 1,365
elmira ny
hp340nos
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,365
elmira ny
|
i ran a best of 7.311@94.73 ,60FT was 1.62,launching at 2000,shift at 6000.i also ran 7.35@94.31 ,7.32@94.3 ,7.315@94.55 i dropped the tire pressure down to 18 psi and ran it just like i do on the street,9sec phil was down there also,gave me some tips.thanks phil,
|
|
|
Re: what will it run 418 stroker ?1/8 mile
[Re: hp340nos]
#816797
10/02/10 09:12 AM
10/02/10 09:12 AM
|
Joined: Nov 2004
Posts: 3,547
Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,547
Syracuse,NY
|
Very nice Mike. ...and you got to drive it home.....sweet.
For the record, the track is up on a mountain, he will/would run at least a tenth faster " down off the mountain". A little tuning, some more carb and I bet its 11.10's. Not bad for a truck with factory iron heads. The 60's definately hurt the overall ET, but its not a dedicated race vehicle either. Good job first time out.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: what will it run 418 stroker ?1/8 mile
[Re: CompWedgeEngines]
#816798
10/02/10 09:31 AM
10/02/10 09:31 AM
|
Joined: Aug 2008
Posts: 941
Texas, USA
ChrgrCuda
super stock
|
super stock
Joined: Aug 2008
Posts: 941
Texas, USA
|
Great results. Anytime you can drive it to the track and run those kind of numbers, you should be very very happy. Great job!
68 Cuda Notchback [Email]10.86@120[/Email]
69 Charger R/T 440/505
2009 Challenger SRT8
|
|
|
|
|
|
|
Its almost identical to what my 63 runs. Its a driver also and my best 1/8 is 7.28 @ 94 mph and the 1/4 on that pass was 11.49 @ 116. You are easy 11.50's right now. Thats a good running combo. 
Ron