Planning a disc brake swap and I got a pair of spindles with caliper adapters from a buddy (he got them at a swap meet). They're supposed to be E-Body

The part numbers are RF spindle 2535692 with the caliper adapter KH80034 and LF spindle 2535693 and the adapter KH83525.

I've search my parts books and online and I can't find those spindle numbers.
I need to figure out so I can order the correct wheel bearings and other parts.

Any ideas what they came off?

pictures we need pictures

I figured the part numbers would be enough (considering all the spindles look basically the same), but you want pics so here they are freshly sand blasted.

yes they look like early pin type disc brake spindals for an e body

Probably 70-72 B/E body spindles with the small wheel bearing. You'll have to measure the inner wheel bearing area to know for sure. The small wheel bearing spindles require the much more expensive 70-72 rotor.

I think Dr Diff sells the bearing spacers to use the more common Unicast rotors.

With those casting numbers on your spindles they are:
1970-72 B&E Body disc brake spindles.
I have a couple of sets on my storage shelving with those numbers on them, so now you can officially know what you have.

Thanks for the replies!

The thing that was confusing me is my parts books says the numbers for 70-72 B & E Bodies are 2535694 & 2535695.

You need a casting number book if you're looking at casting numbers. Part numbers are for the finished part after machining. GG has casting numbers in his books.