Re: 440 Source Stealth Heads
[Re: ireland383]
#642814
03/17/10 06:38 PM
03/17/10 06:38 PM
|
Joined: Jan 2003
Posts: 2,322
sixbbl69
top fuel
|
top fuel
Joined: Jan 2003
Posts: 2,322
|
Quote:
Oh here we go again. I'll take Stealths any day over Eddies for price.
and you get what you pay for.not saying anything bad about any head.
|
|
|
Re: 440 Source Stealth Heads
[Re: ireland383]
#642815
03/17/10 06:44 PM
03/17/10 06:44 PM
|
Joined: Jul 2008
Posts: 30,486 Florida STAYcation
dOc …
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,486
Florida STAYcation
|
Quote:
No not poor quality, just common sense says to look a part over before you bolt on.
COMMON SENSE ? .... so if you buy a complete motor or transmission ... you should DISassemble that and check-all the internals?
|
|
|
Re: 440 Source Stealth Heads
[Re: 2fast4yourBrain]
#642817
03/17/10 07:10 PM
03/17/10 07:10 PM
|
Joined: Mar 2010
Posts: 130 Marcell, MN
68 Roadrunner
member
|
member
Joined: Mar 2010
Posts: 130
Marcell, MN
|
Quote:
I can understand changing the locks (and springs for high lift cams), but why change the retainers if you're not racing?
Something wrong w/them?
Seems like a waste. I think for added insurance, the heads should just come with 10* Comp locks.
For sure! I couldn't believe when the guy at 440 Source told me I had to change them because my cam was over .510 lift. Are a lot of guys buying aluminum heads and running small cams? Should just come with them standard IMO. So far that is my only complaint. I still don't have the motor assembled so I can't tell you how well they work!
1968 Roadrunner 383 auto
.060 KB 400 domed pistons, Stealth heads, Torker intake, Holley 830, Lunati Voodoo cam 276/284, .513/.533, TCI 3500, 3.91 gears, all ARP fasteners,
|
|
|
Re: 440 Source Stealth Heads
[Re: dOc …]
#642818
03/17/10 07:42 PM
03/17/10 07:42 PM
|
Joined: Jan 2006
Posts: 366 San Gabriel, CA 91775
rexus31
enthusiast
|
enthusiast
Joined: Jan 2006
Posts: 366
San Gabriel, CA 91775
|
Double check the fitment of the head gaskets to make sure they do not breach the chamber.
2007 Dodge Charger R/T, Road and Track Performance Group, Steel Blue
1965 Chrysler 300 Convertible, 383 4V, 727TF, Factory Air, Spanish Red
1964 Pontiac GTO, Tri-Power, 4 Speed, Grenadier Red
"What ain't no country I ever heard of. They speak English in What?" - Jules Winnfield
|
|
|
Re: 440 Source Stealth Heads
[Re: iron6]
#642821
03/18/10 01:56 AM
03/18/10 01:56 AM
|
Joined: Jan 2003
Posts: 1,490 smyrna,tn
draginmopars
pro stock
|
pro stock
Joined: Jan 2003
Posts: 1,490
smyrna,tn
|
i bought an early set...I found out after porting / removing the pinch area, then went to check pushrod length, 3/8 were rubbbing with a .588 cam. I couldn't clearance the rods cause the wall was already thin Called Manton got some 11/32 dia. Been runnning them 2 years now no problems [image] [/image]
Ha-Ha Racin Havin Fun 101
Howard
68 "Cummins" Satellite 70 W-2 449 "More Door" Dart 70 340 Dart Swinger, 4spd 71 360 Dart Swinger 72 540/ 518 Dart Swinger 73 airwolf 446/a-500 Cuda 73 "Cummins" Crew cab-car hauler 84 446 Dodge Rampage (tube chassis) 92 CTD 11' flat bed 92 CTD club cab 07 Dodge Caliber
|
|
|
Re: 440 Source Stealth Heads
[Re: GTXKen]
#642822
03/18/10 09:10 AM
03/18/10 09:10 AM
|
Joined: Oct 2005
Posts: 8,911 Ontario, Canada
Stanton
Don't question me!
|
Don't question me!
Joined: Oct 2005
Posts: 8,911
Ontario, Canada
|
Quote:
As consumers we should at least expect that a set of heads that costs from $1000 to $2000 and are promoted as bolt ons should at minimum have a proper valve job including spring heights and stem heights etc.
Personally I think everyone takes the "bolt-on" or "ready to run" statement too literally.
Buying car parts is no different than buying a door at Home Hardware - it may need some material shaved off the edge before it closes or need the hinges moved a tad to fit.
Or how about buying a "ready to serve" TV dinner - sure its ready to serve ... AFTER you heat it up.
And then there's the fact that car guys are a picky bunch. I don't doubt that those heads are WAY better out of the box than any head that came on your original car BUT ... someone tore a set down and they weren't absolutely perfect so now everyone is expecting Super Stock quality parts when that was never the manufacturers intention to provide.
Let's face it guys, $1000 for a pair of aluminum heads is pretty damn cheap. And if you bolted them on with stock hardware (what they're made for) they'd likely work just fine and give you years of trouble-free service.
|
|
|
Re: 440 Source Stealth Heads
[Re: Stanton]
#642823
03/18/10 10:00 AM
03/18/10 10:00 AM
|
Joined: Jan 2003
Posts: 21,085 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,085
Niles , Ohio
|
As my machinist said they werent bad for a grand.They arent a $3000 set of heads.If my motor wasnt so radical and 4 speed I could have run them pretty much out of the box.But with a .588 solid cam I swapped stuff.Im still happy with them for the price.Even if they were hi buck heads I would have them checked anyway.Rocky
Chrysler Firepower
|
|
|
Re: 440 Source Stealth Heads
[Re: Stanton]
#642824
03/18/10 10:45 AM
03/18/10 10:45 AM
|
Joined: Nov 2004
Posts: 843 Suffolk,VA
ireland383
super stock
|
super stock
Joined: Nov 2004
Posts: 843
Suffolk,VA
|
Quote:
Quote:
As consumers we should at least expect that a set of heads that costs from $1000 to $2000 and are promoted as bolt ons should at minimum have a proper valve job including spring heights and stem heights etc.
Personally I think everyone takes the "bolt-on" or "ready to run" statement too literally.
Buying car parts is no different than buying a door at Home Hardware - it may need some material shaved off the edge before it closes or need the hinges moved a tad to fit.
Or how about buying a "ready to serve" TV dinner - sure its ready to serve ... AFTER you heat it up.
And then there's the fact that car guys are a picky bunch. I don't doubt that those heads are WAY better out of the box than any head that came on your original car BUT ... someone tore a set down and they weren't absolutely perfect so now everyone is expecting Super Stock quality parts when that was never the manufacturers intention to provide.
Let's face it guys, $1000 for a pair of aluminum heads is pretty damn cheap. And if you bolted them on with stock hardware (what they're made for) they'd likely work just fine and give you years of trouble-free service.
Well said Stanton!
|
|
|
Re: 440 Source Stealth Heads
[Re: ireland383]
#642825
03/18/10 10:54 AM
03/18/10 10:54 AM
|
Joined: Mar 2010
Posts: 130 Marcell, MN
68 Roadrunner
member
|
member
Joined: Mar 2010
Posts: 130
Marcell, MN
|
Not too start an argument here. But I have to say I disagree. A bolt on part should be just that. I manage a Lumberyard / hardware store. When we sell a door it is ready to install. You don't need to adjust the hinges or trim the edge! (atleast not on a prehung door) If I was selling just a door slab that a person was going to retrofit into an old door frame...then that would be a different story. But I wouldn't advertise that as a "bolt on" type part. (like the heads are) If they are selling them as a "bolt on" then they should be ready to install. I can't even imagine selling someone a new steel entry door and then they had to move the hinges and "trim the edge". Just my
1968 Roadrunner 383 auto
.060 KB 400 domed pistons, Stealth heads, Torker intake, Holley 830, Lunati Voodoo cam 276/284, .513/.533, TCI 3500, 3.91 gears, all ARP fasteners,
|
|
|
Re: 440 Source Stealth Heads
[Re: ireland383]
#642826
03/18/10 10:54 AM
03/18/10 10:54 AM
|
Joined: Jul 2003
Posts: 4,793 Holland MI Ottawa
2boltmain
master
|
master
Joined: Jul 2003
Posts: 4,793
Holland MI Ottawa
|
The 510" lift max of the stock springs is probably due to the fact that the heads are a stock replacement type head- and compared to stock cams a 510 lift cam (509) is much much bigger/aggressive than stock. ???
Keep old mopars alive.
|
|
|
Re: 440 Source Stealth Heads
[Re: 2boltmain]
#642827
03/18/10 10:56 AM
03/18/10 10:56 AM
|
Joined: Mar 2010
Posts: 130 Marcell, MN
68 Roadrunner
member
|
member
Joined: Mar 2010
Posts: 130
Marcell, MN
|
Quote:
The 510" lift max of the stock springs is probably due to the fact that the heads are a stock replacement type head- and compared to stock cams a 510 lift cam (509) is much much bigger/aggressive than stock. ???
That makes sense. I guess I don't consider them a stock replacement head.
1968 Roadrunner 383 auto
.060 KB 400 domed pistons, Stealth heads, Torker intake, Holley 830, Lunati Voodoo cam 276/284, .513/.533, TCI 3500, 3.91 gears, all ARP fasteners,
|
|
|
Re: 440 Source Stealth Heads
[Re: 68 Roadrunner]
#642828
03/18/10 10:57 AM
03/18/10 10:57 AM
|
Joined: Mar 2010
Posts: 130 Marcell, MN
68 Roadrunner
member
|
member
Joined: Mar 2010
Posts: 130
Marcell, MN
|
Are a lot of guys really putting these heads on a totally stock motor?
1968 Roadrunner 383 auto
.060 KB 400 domed pistons, Stealth heads, Torker intake, Holley 830, Lunati Voodoo cam 276/284, .513/.533, TCI 3500, 3.91 gears, all ARP fasteners,
|
|
|
Re: 440 Source Stealth Heads
[Re: 68 Roadrunner]
#642829
03/18/10 11:25 AM
03/18/10 11:25 AM
|
Joined: Jul 2008
Posts: 30,486 Florida STAYcation
dOc …
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,486
Florida STAYcation
|
Quote:
Not too start an argument here. But I have to say I disagree. A bolt on part should be just that. I manage a Lumberyard / hardware store. When we sell a door it is ready to install. You don't need to adjust the hinges or trim the edge! (atleast not on a prehung door) If I was selling just a door slab that a person was going to retrofit into an old door frame...then that would be a different story. But I wouldn't advertise that as a "bolt on" type part. (like the heads are) If they are selling them as a "bolt on" then they should be ready to install. I can't even imagine selling someone a new steel entry door and then they had to move the hinges and "trim the edge". Just my
THERE you go ...... now to the guy that compares a set of these (or any) heads to heating-up a TV dinner ? ...
|
|
|
Re: 440 Source Stealth Heads
[Re: 68 Roadrunner]
#642830
03/18/10 11:28 AM
03/18/10 11:28 AM
|
Joined: Jul 2008
Posts: 30,486 Florida STAYcation
dOc …
The village idiot's idiot
|
The village idiot's idiot
Joined: Jul 2008
Posts: 30,486
Florida STAYcation
|
Quote:
Are a lot of guys really putting these heads on a totally stock motor?
I would suggest that THIS would be a major mistake .. it could slow the car down .. big-time.
|
|
|
|
|