440 engine identification - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 440 engine identification

Print Thread

Page 2 of 2

1

2

Re: 440 engine identification [Re: YGBSM] #600478 02/04/10 11:44 AM 02/04/10 11:44 AM
Joined: Aug 2009 Posts: 325 GA R roy2345 OP enthusiast
roy2345 OP enthusiast R Joined: Aug 2009 Posts: 325 GA	so it should be 906 heads then? what wld be that engine specs?

Re: 440 engine identification [Re: roy2345] #600479 02/04/10 11:50 AM 02/04/10 11:50 AM
Joined: Mar 2007 Posts: 447 Knoxville, TN Y YGBSM mopar
YGBSM mopar Y Joined: Mar 2007 Posts: 447 Knoxville, TN	The only way to be certain you have 906 heads is to pull off the valve covers and look at the numbers stamped on the intake runners. The last three digits should be 906. 1968 Charger R/T 2015 Charger R/T Scat Pack 2017 Durango Citadel

Re: 440 engine identification [Re: roy2345] #600480 02/04/10 11:52 AM 02/04/10 11:52 AM
Joined: Aug 2003 Posts: 4,481 Mesa, AZ P Pat_Whalen super gas
Pat_Whalen super gas P Joined: Aug 2003 Posts: 4,481 Mesa, AZ	And just for reference, valve springs with dampers look like this:

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1