will aluminum heads make a difference on my motor? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer will aluminum heads make a difference on my motor?

Print Thread

Page 2 of 2

1

2

Re: will aluminum heads make a difference on my motor? [Re: WILD BILL] #587882 01/20/10 02:40 PM 01/20/10 02:40 PM
Joined: Jan 2003 Posts: 1,490 smyrna,tn D draginmopars pro stock
draginmopars pro stock D Joined: Jan 2003 Posts: 1,490 smyrna,tn	Quote: GEnsrud, reread Dodgem's post. He didn't say they were crap. He said they were a "crap shoot" Notice that he edited it... said Crap last time, then was changed

Re: will aluminum heads make a difference on my motor? [Re: draginmopars] #587883 01/20/10 04:06 PM 01/20/10 04:06 PM
Joined: Jan 2003 Posts: 1,490 smyrna,tn D draginmopars pro stock
draginmopars pro stock D Joined: Jan 2003 Posts: 1,490 smyrna,tn	for the last 2 years, I've beat the "crap" out of my engine (stealth heads) nothing has came out yet if did fry 3rd gear, was the reason for pulling the eng/trans. ported cast head= 7.51 et. ported stealth head= 7.38 everything else the same with et streets and mufflers Ha-Ha Racin Havin Fun 101 Howard 68 "Cummins" Satellite 70 W-2 449 "More Door" Dart 70 340 Dart Swinger, 4spd 71 360 Dart Swinger 72 540/ 518 Dart Swinger 73 airwolf 446/a-500 Cuda 73 "Cummins" Crew cab-car hauler 84 446 Dodge Rampage (tube chassis) 92 CTD 11' flat bed 92 CTD club cab 07 Dodge Caliber

Re: will aluminum heads make a difference on my motor? [Re: draginmopars] #587884 01/20/10 04:44 PM 01/20/10 04:44 PM
Joined: Mar 2008 Posts: 5,746 Ontario, Canada Dodgem master
Dodgem master Joined: Mar 2008 Posts: 5,746 Ontario, Canada	Quote: Quote: GEnsrud, reread Dodgem's post. He didn't say they were crap. He said they were a "crap shoot" Notice that he edited it... said Crap last time, then was changed No the edit wast to add this line "Now if your were bracket racing the extra 2 3 tenths an OOTB eddy would give means a lot on the street you will not feel it or feel very little" I have a set of 440 source in my garage. A friends! Absolutly will not flow OOTB what a eddy will No way near as nice a head as an eddie. Guys who have flowed them 250 OOTB where eddies are 280 to 290 OOTB. Both CNC they are close why can't people under stand that?? Better than a stock iron you bet!! I shop at walmart too sometimes you get what you pay for!!!

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1