here is a better one, 325/50/15 on a 10" rim 4.75" back space. I have more clearance on the pass side (1") than the drivers side ( .5") I think 4.5" back space would have been better, I have the room against the lip on the quarter panel

one more

last, super stock springs, all factory sheet metal

Josh, nice Charger. After seeing your pics, it's gonna be tight if I go this route. I'd actually want a little more backspace and I would just bend that flange and probably have to offset the springs a bit.

Borrowed a 15x10 with 5.5'' backspacing to check. The tires mounted on these wheels are M/T Indy S/S N-50's which spec out at 28'' tall, 11.80'' tread and 14.10'' section width. The 325/50/15 M/T drag radials I want are 28'', 11.60'' and 13.10''. Anyways, here's a pic. The car doesn't sit as low as I thought it would considering it has -1'' Caltrac springs and 2'' blocks. I did use a 1/4'' wheel spacer to give me plenty of clearance on the back side.